bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing High-pressure Nozzle Of Headlight Washer Syste > < 1 RA Overview Of Windscreen Wiper, Windscreen Washer And Headlight Washer Systems
Page 1
background image

61 67 010

Removing and installing/replacing washer
pump of headlight washer system 

Necessary preliminary tasks:

Remove trim panel for cover on frame side member on right

Remove wheel arch trim at front right

Drain fluid reservoir for windscreen washer system

Release bolts.

Press off side panel slightly.

Note:

Side panel shown removed for purposes of clarity.

 

Disconnect plug connection (1).

Pull washer pump (2) in direction of arrow out of fluid reservoir for
windscreen washer system.

Disconnect hose plug connection (3) from washer pump (2).

Installation:

Coat sealing ring (4) of washer pump (2) with antiseize agent.

Ensure hose is laid without kinks.

RA  Removing and installing/replacing washer pump of headlight washer system

BMW AG - TIS

08.02.2013  14:01

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing High-pressure Nozzle Of Headlight Washer Syste > < 1 RA Overview Of Windscreen Wiper, Windscreen Washer And Headlight Washer Systems