X Series E70 X5 4.8i (N62TU) OFFRD
63 12 895
Replacing drive/electronics box for left
adaptive headlight
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore disconnect all components from voltage
supply before removal.
Work on the entire xenon lighting system (ignition unit, control
unit and lamp) may only be carried out by specialist
personnel.
Necessary preliminary tasks:
•
Remove wheel arch cover front section at front
Release screws (1).
Remove drive for adaptive headlight (2) from headlight.
Installation:
Fit drive for adaptive headlight (2) exactly on headlight.
Make sure pin housing (2) is correctly seated in plug
housing (3).
RA Replacing drive/electronics box for left adaptive headlight
BMW AG - TIS
08.02.2013 14:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -