bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Left Or Right Rear Light (in Side Panel)|Page 2689 > < 2 RA Replacing Sealing Frame For Left Or Right Rear Light (on Side Panel)
Page 1
background image

63 21 180

Removing and installing/replacing left or right
rear light (in side panel)

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Remove flap in luggage compartment panel

Remove warning triangle

Disconnect plug connection (1).

Unscrew nuts (2). 

Tightening torque  63 21 1AZ

.

Remove rear light (3) in outwards direction from side panel.

Installation:

Make sure gap is uniform all round between rear light (3) and
side panel.

Installation:

Make sure seal (1) is correctly seated on rear light (2).

Make sure guide (3) is correctly seated on side panel.

RA  Removing and installing/replacing left or right rear light (in side panel)

BMW AG - TIS

08.02.2013  14:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Left Or Right Rear Light (in Side Panel)|Page 2689 > < 2 RA Replacing Sealing Frame For Left Or Right Rear Light (on Side Panel)