X Series E70 X5 4.8i (N62TU) OFFRD
Release screw (1).
Tightening torque 64 11 4AZ
.
Release screw (1).
Tightening torque 64 11 4AZ
.
Important!
Cover vehicle interior with protective cover to prevent interior
being fouled by escaping coolant.
Feed out heater (2).
Replacement:
•
Modify evaporator
•
Modify heater core
•
Modify expansion valve
•
Modify all servodrives
Installation:
Water drain (1) must be inserted on both sides into outlet
channel (2).
Important!
In the event of incorrect fitting, there is a risk of leakage in the
passenger compartment!
RA Removing and installing/replacing heater
BMW AG - TIS
08.02.2013 14:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
