bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Heater|Page 2732 > < 2 RA Installing Servodrive
Page 1
background image

64 11 206

Removing and installing/replacing heater

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Avoid contact with refrigerant and refrigerant oil.

Follow safety instructions for handling refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Follow instructions for opening and replacing parts in
refrigerant circuit!

If A/C system is opened for more than 24 hours:Replace
desiccant insert for A/C system

Necessary preliminary tasks:

Drain off air conditioner

Remove carrier for instrument panel

Unclip wiring harness holders from heater 

Recycling

Coolant emerges when coolant lines are detached. Have a
suitable collecting container ready.

Catch and dispose of escaping coolant.

Observe country-specific waste-disposal regulations.

RA  Removing and installing/replacing heater

BMW AG - TIS

08.02.2013  14:54

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Heater|Page 2732 > < 2 RA Installing Servodrive