X Series E70 X5 4.8i (N62TU) OFFRD
65 77 720
Removing and installing (replacing) left B-
pillar sensor
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover
•
Remove front entrance cover strip
•
Remove seat belt retractor with holder
Version with rear cabin air conditioning:
•
Remove front seat
•
Remove rear cabin ventilation duct from B-pillar
•
Partially detach carpet in area of B-pillar
•
If necessary, remove rear cabin ventilation duct under carpet
Release screws (1), feed out sensor and disconnect associated
plug connection.
Tightening torque 65 77 3AZ
.
RA Removing and installing (replacing) left B-pillar sensor
BMW AG - TIS
08.02.2013 17:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -