X Series E83 X3 2.0d (M47T2) OFFRD
Remove bearing caps of inlet camshaft and lift out inlet camshaft.
All bearing caps are marked.
E= inlet camshaft.
A = exhaust camshaft.
Note:
Worn rockers may only be reused on the same grooves of the
camshaft.
Important!
These screws must "not" be removed.
Note:
E
Inlet camshaft
A
Exhaust camshaft
RA Removing and installing/replacing inlet camshaft (M47T2)
BMW AG - TIS
04.02.2013 10:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
