X Series E83 X3 2.0d (M47T2) OFFRD
-
Release oil dipstick guide tube on manifold. Do not remove
guide tube.
-
Remove plug from oil pressure switch.
-
Detach vacuum hoses from EPPT.
-
Remove main flow oil filter housing from engine block (four
screws).
Installation:
Clean sealing surface on engine block.
Installation:
Clean sealing surfaces.
Replace seals (1 and 2).
Assemble engine.
RA Removing and installing/sealing or replacing complete main flow oil filter (M47T
BMW AG - TIS
04.02.2013 10:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -