X Series E83 X3 2.0d (M47T2) OFFRD
Cut connecting links (1) on gasket (2) accordingly.
Important!
Do not damage sealing surface.
Cut through connecting links (1) of gasket (2) with a small cross-
cut chisel (3).
Remove gasket.
Clean sealing surface.
Installation:
Prior to installation, first position new gasket on sealing face
of crankcase and check for correct seating.
Assemble engine.
Vent cooling system and check for leaks.
RA Removing and installing or replacing water pump (M47TU / M47TU2 / M57TU / M57T2)
BMW AG - TIS
04.02.2013 10:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -