X Series E83 X3 2.0d (M47T2) OFFRD
12 51 200
Replacing wiring harness section for injectors
(M47T2)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
•
Disconnect battery negative lead
•
Remove acoustic cover at front and rear
Unfasten screws.
Remove electronics box cover (1).
Unlock plug on control unit and disconnect.
Withdraw lock (1).
Press out plug (2) in direction of arrow.
Unfasten screws.
Unlock injector plugs and disconnect.
Remove wiring harness section for injectors.
RA Replacing wiring harness section for injectors (M47T2)
BMW AG - TIS
04.02.2013 11:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
