Replacing Crankshaft Pulse Generator for X3 20d: Repair Instructions
13 62 610
Replacing crankshaft pulse generator (M47TU
/ M57TU / M47T2 / M57T2)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Remove starter motor
Pull plug (1) off pulse generator.
Detach mating connector (2) from holder.
Unscrew bolt (3).
Remove pulse generator.
Clear DDE fault memory.
RA Replacing crankshaft pulse generator (M47TU / M57TU / M47T2 / M57T2)
BMW AG - TIS
04.02.2013 11:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -