X Series E83 X3 2.0d (M47T2) OFFRD
Necessary preliminary tasks:
•
Draw off fuel from fuel tank
•
Remove rear seat bench
Release screws (1) and remove cover (2) from right side of fuel
tank.
Unfasten plug connection (1) and disconnect.
Important!
-
Press the blue button to unlock the quick-release
fastener. Then carefully detach fuel feed line vertically
upwards.
-
Do not use any mechanical tools or means to detach the
quick-release fastener.
-
Quick-release fastener must be attached vertically
without mechanical tools/means. It must snap audibly
into place.
-
Then carry out a leak test with engine running.
-
Damaged or leaking quick-release fasteners must be
replaced.
Unlock and disconnect fuel feed line (2).
Unlock and detach vent line (3).
RA Removing and installing or replacing fuel gauge sensor (diesel, right)
BMW AG - TIS
04.02.2013 11:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -