X Series E83 X3 2.0d (M47T2) OFFRD
17 00 039
Venting cooling system and checking for
water leaks (M47T2, N47, N43)
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
Check cooling system for leaks.
Note:
When adding coolant, it is absolutely essential to adhere to the
following sequence:
1.
Open cap on expansion tank
2.
Open bleed screw (located at front under acoustic cover)
3.
Switch ignition on
4.
Seat heating to maximum and fan to low speed (heater
valves are opened and auxiliary water pump starts up)
5.
Add coolant slowly.
RA Venting cooling system and checking for water leaks (M47T2, N47, N43)
BMW AG - TIS
04.02.2013 11:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
