bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

18 Exhaust System (M47T2) > < 7 RA Removing And Installing_replacing Cooling Loop For Power Steering|Page 610
Page 1
background image

17 51 000

Removing and installing/replacing intercooler
(M57T2, M47T2, N47)

Necessary preliminary tasks:

Remove fan cowl

Unlock and disconnect left and right charge-air hoses

Remove front underbody protection

Remove trim on radiator at bottom

Important!

Coat sealing rings of quick-connect couplings with antiseize
agent.

Pressure pipes cannot be fitted without antiseize agent.

Release screw.

Release screw.

Remove intercooler (1).

Installation:

Charge-air hoses must audibly snap into place.

Assemble vehicle and check system for leaks.

RA  Removing and installing/replacing intercooler (M57T2, M47T2, N47)

BMW AG - TIS

04.02.2013  11:58

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

18 Exhaust System (M47T2) > < 7 RA Removing And Installing_replacing Cooling Loop For Power Steering|Page 610