X Series E83 X3 2.0d (M47T2) OFFRD
27 10 010
Removing and installing transfer case (ATC
400 X-Drive)
Special tools required:
•
00 2 030
•
23 0 132
•
23 4 050
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Important!
After completing work, check gear oil level and top up if
necessary.
Filler plug (1):
Tightening torque 27 00 11AZ
.
Gear oil level up to filler edge of filler plug (1).
Use only the approved gear oil.
Failure to comply with this requirement will result in serious
damage to the transfer box!
Necessary preliminary tasks:
•
Remove complete exhaust system.
•
Remove heat shield.
RA Removing and installing transfer case (ATC 400 X-Drive)
BMW AG - TIS
04.02.2013 12:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -