X Series E83 X3 2.0d (M47T2) OFFRD
33 32 087
Removing and installing/replacing bottom
right control arm
Note:
If the lower control arm is detached from the rear axle
carrier/trailing arm, it is necessary after reinstallation to carry out a
wheel/chassis alignment check.
Necessary preliminary tasks:
•
Remove rear wheel.
•
Remove output shaft from rear differential
Note:
The subsequent procedure is described in the document "
Removing and installing/replacing lower left control arm".
After installation:
•
Check that output shaft is correctly seated in rear differential.
•
Perform chassis alignment check
RA Removing and installing/replacing bottom right control arm
BMW AG - TIS
04.02.2013 18:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
