X Series E83 X3 2.0d (M47T2) OFFRD
51 11 156
Removing and installing front bumper trim
(up to 09/2006)
Special tools required:
•
00 9 317
Release screws (1).
Remove air duct (2).
Installation:
Make sure air duct (2) is in correct position.
Release screws (1) on bumper trim (2).
Installation:
Height adjustment, refer to Gap dimensions, body.
Lever trim (1) with special tool 00 9 317 out of bumper trim (2)
in direction of arrow.
RA Removing and installing front bumper trim (up to 09/2006)
BMW AG - TIS
04.02.2013 20:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
