X Series E83 X3 2.0d (M47T2) OFFRD
Slide special tool 00 9 322 between trim (1) and bumper
trim (2) and press down catches (3).
Unclip trim (1) towards rear.
Pull trim (1) towards rear slightly and release all further
catches (3) with special tool
00 9 322 .
Installation:
Catches (3) must not be damaged.
RA Removing and installing/replacing trim for bumper trim at rear
BMW AG - TIS
04.02.2013 20:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
