X Series E83 X3 2.0d (N47) OFFRD
Using special tool 11 8 815 fit FPM ring (1) in direction of arrow
up to timing case cover and position.
Remove special tool 11 8 815 .
Secure special tool 11 8 811 with special tool 11 8 812 to
crankshaft.
Position FPM ring (1).
Slide on special tool 11 8 813.
Screw down special tool 11 8 814.
Press in FPM ring with special tool 11 8 813 .
Screw in special tool 11 8 813 up to timing case cover.
RA Replacing crankshaft seal at rear (N47, N47S)
BMW AG - TIS
05.02.2013 21:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -