X Series E83 X3 2.0d (N47) OFFRD
Installation:
The gearwheel must be loose on the right-hand counterbalance
shaft otherwise it will not be possible to install the intermediate
gearwheel.
Install intermediate gearwheel.
Tighten nut (1).
Tightening torque: 11 27 2AZ
.
Tighten screw for counterbalance shaft with special tool
00 9 120 .
Tightening torque: 11 27 1AZ
.
Note:
Shown with crankshaft removed for clearer illustration.
Fit screw for counterbalance shaft and tighten with special tool
00 9 120 .
Tightening torque: 11 27 1AZ
.
Note:
Shown with crankshaft removed for clearer illustration.
Check axial play.
RA Replacing crankshaft (N47, N47S)
BMW AG - TIS
05.02.2013 21:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -