X Series E83 X3 2.0d (N47) OFFRD
11 21 531
Replacing all main crankshaft bearing shells
(N47, N47S)
Special tools required:
•
00 2 590
Important!
Replace main bearing screws.
There must be no oil in the blind holes (risk of cracking).
Do not wash off bolt coating.
Incorrect installation of the bearing caps will result in damage
to the crankcase.
Check grinding size of crankshaft.
Installation:
The assignment of the bearing shells in the crankcase
(classification) may no longer apply after the crankshaft has
been replaced.
Install yellow bearing shells in crankcase (see Installation
Instructions of BMW Parts Service).
Bearing classification from 1 to 3 possible.
1:
Bearing colour - yellow
2:
Bearing colour - green
3:
Bearing colour - white
RA Replacing all main crankshaft bearing shells (N47, N47S)
BMW AG - TIS
05.02.2013 21:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -