X Series E83 X3 2.0d (N47) OFFRD
11 33 062
Removing and installing/replacing all finger
rocker arms (N47, N47S)
Special tools required:
•
11 4 480
•
11 5 320
•
11 6 480
Necessary preliminary tasks:
•
Remove cylinder head cover.
Crank engine with special tool 11 6 480 to firing TDC position of
cylinder no. 1.
Important!
Do not crank the engine back.
Remove protective cap of timing case cover.
Block crankshaft in firing TDC position of cylinder no. 1 with
special tool 11 5 320 .
RA Removing and installing/replacing all finger rocker arms (N47, N47S)
BMW AG - TIS
05.02.2013 21:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -