X Series E83 X3 2.0d (N47) OFFRD
12 63 520
Replacing DDE master relay (N47)
Necessary preliminary tasks:
•
Switch off ignition
•
Connect DIS Tester
Release screws (1).
Installation:
Tightening torque 12 90 4AZ
.
Remove cover (1).
Arrangement:
1.
DDE main relay
Notes on troubleshooting:
If the starter motor cranks the engine during the starting sequence
but the engine fails to fire, then:
1.
Check engine fuses
2.
If the fuses have blown, replace them completely with the
fuse holder
3.
Find out why fuses have blown
Continue troubleshooting as per DIS instructions.
RA Replacing DDE master relay (N47)
BMW AG - TIS
05.02.2013 22:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -