X Series E83 X3 2.0d (N47) OFFRD
Before installing pressure sensor, check thread and sealing face
for damage. Make sure all parts are clean when installing
pressure sensor (1). Lightly grease thread on pressure sensor.
Screw in pressure sensor by hand.
Installation:
Tightening torque 13 53 3AZ
.
Assemble engine and check fuel system for leaks.
Reset quantity mean value adaptation with BMW diagnosis
system.
RA Removing and installing/replacing pressure sensor on pressure accumulator of fue
BMW AG - TIS
05.02.2013 22:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
