X Series E83 X3 2.0d (N47) OFFRD
13 71 000
Removing and installing/replacing intake filter
housing (N47)
Necessary preliminary tasks:
•
Switch off ignition
•
Remove acoustic cover.
•
Release clamp on air-mass sensor, disconnect air-mass
sensor.
Picture shows intake filter housing opened.
Release air duct.
Installation:
Tightening torque, 13 71 1AZ
Release intake filter housing and remove towards rear.
RA Removing and installing/replacing intake filter housing (N47)
BMW AG - TIS
05.02.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -