X Series E83 X3 2.0d (N47) OFFRD
Check clutch disk for wear:
Measure lining protrusion at lining rivets at closing head (A) in
each case.
Note:
Rivet connection
a)
Closing head
b)
Swage head
Replace clutch plate if lining protrusion at closing head (A) is less
than 1 mm.
Push clutch disk onto the cleaned transmission input shaft and
check for easy movability.
Important!
Do not clean SAC clutch with high-pressure cleaner or
washing machine as this may impair function of adjustment
unit.
Clean friction surface only.
Check SAC clutch for wear and damage and replace if
necessary.
Reinstalling removed SAC clutch and clutch plate:
Set SAC clutch (1) down on a clean surface.
Install special tool 21 2 180 in SAC clutch (1).
RA Removing and installing or replacing clutch (SAC 240)
BMW AG - TIS
05.02.2013 23:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -