X Series E83 X3 2.0d (N47) OFFRD
Press special tool 21 2 180 together at handles (3) as far as it
will go and grip firmly.
At same time tighten down knurled screws (2).
Adjustment ring of SAC clutch is now secured in new position.
Screw in spindle (1) until diaphragm spring (2) is tensioned up to
stop.
Important!
Handle clutch plate with care, do not touch surfaces of friction
linings.
Install clutch plate in correct position.
Pay attention to text "engine end" / "transmission side".
Installation:
N52
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
Centre clutch plate (1) with special tool.
Special tool
Transmission
21 2 141
RA Removing and installing or replacing clutch (SAC 240)
BMW AG - TIS
05.02.2013 23:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -