X Series E83 X3 2.0d (N47) OFFRD
Installation:
The pin is coded by a straight surface (1).
The coding points upwards.
Screw pin with coding upwards. Turn slightly until coding snaps
into place. Press in pin until engaged (2).
Unfasten screws.
Tightening torque 21 52 2AZ
.
Detach retainer (1) with a screwdriver (2).
Note:
Do not foul carpet with brake fluid.
Detach hydraulic line from clutch master cylinder.
Detach supply hose (1) from clutch master cylinder and remove
clutch master cylinder.
Important!
Do not pull supply hose completely into interior.
RA Removing and installing/replacing clutch master cylinder
BMW AG - TIS
05.02.2013 23:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -