X Series E83 X3 2.0d (N47) OFFRD
Detach plug (1) from reversing light switch.
Release cable from mountings and tie to one side.
Detach plugs (1) and (2) from servomotor.
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tasks are described in Removing clutch slave cylinder.
Supporting transmission:
Support with special tools 23 4 050 , 23 0 132 and 00 2 030 .
Tasks are described in Transmission bracket.
RA Removing and installing transmission (GS6-37BZ) N47
BMW AG - TIS
05.02.2013 23:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -