X Series E83 X3 2.0d (N47) OFFRD
Prepare special tool (1) 24 4 160 with shaped piece (2)
24 4 164 .
Insert special tool 24 4 160 into opening of transmission
housing and tensions slightly with screw (1).
Raise by turning screw (2) and clamp down.
Then tighten down screw (1).
Remove transmission cross-member.
Unlock plug (1) and remove.
Important!
Do not touch pins
Release cable from retainers.
Insert special tool 24 2 390 in sealing sleeve.
Tasks are described in Notes on mechatronics.
RA Removing and installing automatic transmission (6HP19Z) N47
BMW AG - TIS
05.02.2013 23:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
