X Series E83 X3 2.0d (N47) OFFRD
N52:
Important!
Cover alternator with a suitable covering to prevent ingress of
hydraulic fluid.
Release screw (1).
Tightening torque 32 41 9AZ
.
Remove hose clamps if necessary with special tool 32 1 260 .
Note:
If necessary, raise and/or turn fluid reservoir in order to gain better
access to hose clamps.
Disconnect suction line and radiator return line from fluid reservoir.
Lift out fluid reservoir.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Removing and installing/replacing fluid reservoir for power steering
BMW AG - TIS
06.02.2013 01:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -