X Series E83 X3 2.0d (N47) OFFRD
35 11 000
Removing and installing (replacing) complete
bearing block for foot pedal
Necessary preliminary tasks:
•
Remove brake pedal
•
Remove clutch pedal
•
Remove clutch master cylinder from bearing block
Unscrew nuts (1).
Release nut (2) and remove bearing block (3).
Installation:
Tighten nuts (1) in front of nut (2).
Tightening torque 35 11 1AZ
.
RA Removing and installing (replacing) complete bearing block for foot pedal
BMW AG - TIS
06.02.2013 02:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -