X Series E83 X3 2.0d (N47) OFFRD
36 11 533
Removing and installing / replacing RDC
wheel electronics
Special tools required:
•
00 2 190
Important!
If the wheel electronics have been removed, the complete
valve must be replaced.
Note:
If a tyre sealant has been used, replace the wheel electronics.
When a tyre has been removed, do not clean the rim with installed
wheel electronics with high-pressure cleaning equipment.
Do not treat wheel electronics with solvents, cleaning agents etc. If
dirty, wipe with a clean cloth only.
Do not clean wheel electronics with compressed air.
Necessary preliminary tasks:
•
Remove tyre
RA Removing and installing / replacing RDC wheel electronics
BMW AG - TIS
06.02.2013 02:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -