X Series E83 X3 2.0d (N47) OFFRD
37 14 511
Replacing front ride-height sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Disconnect plug connection (1).
Release nut (2) and disconnect jointed rod.
Tightening torque 37 14 7AZ
.
Release screws and remove ride-height sensor (4).
Installation:
Sensor lever (3) must point from ride-height sensor (4) to right
front wheel.
Tightening torque 37 14 6AZ
.
After installation:
•
Check headlight adjustment, correct if necessary
RA Replacing front ride-height sensor
BMW AG - TIS
06.02.2013 02:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -