X Series E83 X3 2.0d (N47) OFFRD
If using vehicle-specific/universal straightening attachment sets (Carbench/ Celette), it is necessary to secure the
body additionally with 4 retaining clips to the spot flange of entrance or to the 4 jacking points. The spot flange (if
available) is to be preferred.
If using universal electronic or mechanical straightening systems (Car-O-liner/ Celette), it is necessary to secure
the body with 4 retaining clips to the spot flange of entrance or to the 4 jacking points. The spot flange (if available)
is to be preferred. In addition anchor at least 2 points with the securing set.
Failure to comply with these instructions will result in damage to the body during reshaping in non-damaged areas.
Vehicle-specific straightening attachments and universal mounts may be damaged.
RA Straightening steel parts
BMW AG - TIS
06.02.2013 03:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -