X Series E83 X3 2.0d (N47) OFFRD
Installation:
Catches (1) on lower section of bumper trim (2) must not be
damaged.
Installation:
If necessary, replace faulty metal nuts (1) on lower section of
bumper trim (3).
When replacing with Park Distance Control version:
Remove ultrasonic transducer (2) from lower section of bumper
trim (3).
Remove locators (4) and spacer rings (5).
If necessary, cut out openings for ultrasonic sensors (2) on lower
section of bumper trim (1) at mouldings.
RA Removing and installing/replacing bumper trim lower section (up to 09/2006)
BMW AG - TIS
06.02.2013 03:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -