X Series E83 X3 2.0d (N47) OFFRD
51 12 080
Removing and installing/replacing trim on
loading sill for rear bumper (from 09/2006)
Note:
Trim (1) is if necessary secured to bumper with double-sided
adhesive tape (3).
Lever out trim (1) from bumper (2).
Installation:
Make sure trim (1) is correctly seated on bumper (2).
Installation:
Engage trim (1) in bumper (2).
RA Removing and installing/replacing trim on loading sill for rear bumper (from 09/
BMW AG - TIS
06.02.2013 03:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -