X Series E83 X3 2.0d (N47) OFFRD
51 13 420
Removing and installing/replacing centre
rear-end trim section
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove number/license plate.
Release screws (1).
Tightening torque 51 13 4AZ
.
Attach adhesive tape (1) underneath centre rear-end trim
section (2) (risk of damage).
Unclip clips (3) with special tool 00 9 317 .
Pull off centre rear-end trim section (2) in direction of arrow a
little.
RA Removing and installing/replacing centre rear-end trim section
BMW AG - TIS
06.02.2013 05:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -