X Series E83 X3 2.0d (N47) OFFRD
Installation:
Guides (1) and catches (2) on switch combination (3) must not
be damaged.
Model with lumbar supports:
If necessary, expose cable (1) and disconnect plug connection (2).
Replacement only:
If necessary, press down catches (3) on left/right and
remove switch (4) from cover.
Installation:
Following parts must not be damaged,
replace cover (4) if necessary:
1.
Mounts for switch combination
2.
Guide, front
3.
Tabs
Replacement of switch combination only or in event of further work
on front seat:
Disconnect plug connection (1) and remove switch combination
(2).
RA Removing and installing/replacing outer cover on front left or right seat (sport
BMW AG - TIS
06.02.2013 06:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -