X Series E83 X3 2.0d (N47) OFFRD
Note:
Always replace mechanism for glass slide/tilt sunroof in pairs.
If necessary, lightly grease guide channel.
Note:
Drip moulding carrier cannot be removed without incurring
damage.
Break out tabs with a screwdriver and lever out carrier.
Installation:
Replace drip moulding carrier and hook into place.
Slide front connecting link (1) towards rear past drive cable plate (2).
If front glass lid is installed, move mechanism with lid.
RA Removing and installing mechanism for rear glass lid
BMW AG - TIS
06.02.2013 06:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -