X Series E83 X3 2.0d (N47) OFFRD
-
Unlock and disconnect plug (1)
-
Detach water drain hoses (2)
Note: Check hoses for damage and moisten with water before fitting
-
Release screws in marked area (when installing: fit washers on front side)
Tightening torque: 54 12 02AZ
.
-
Helper must hold glass sunroof to prevent it falling out.
-
Release screws (3) on and carefully lower slide/tilt sunroof (4).
Important!
Do not damage any surrounding parts when removing slide/tilt sunroof (4).
-
Remove slide/tilt sunroof (4) completely (through rear lid at rear).
Installation:
If necessary, remove fabric adhesive tape.
To stop grating noises, secure all screws (1) prior to installation
with plastic washers (2).
If the standard screws can no longer grip, use "repair screws"
(have larger threads).
RA Removing and installing complete glass slide/tilt sunroof
BMW AG - TIS
06.02.2013 07:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -