X Series E83 X3 2.0d (N47) OFFRD
61 35 122
Removing and installing/replacing general
module
Important!
Read and comply with notes on protection against
electrostatic discharge (ESD protection).
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel
•
Disconnect negative battery cable
•
Remove right glovebox with housing
Release plastic nut (1).
Unclip device holder (2) from fixtures (3).
Unlock plug connections (4) and disconnect.
Press catch (6) and remove general module (5) towards rear.
Replacement:
Carry out programming/coding.
RA Removing and installing/replacing general module
BMW AG - TIS
06.02.2013 09:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
