X Series E83 X3 2.0d (N47) OFFRD
Removal:
Punch out integral cover (1) along line (2) with a suitable tool.
Feed integral cover (1) with drive/electronics box for adaptive
headlight and mounting out of headlight (3).
Disconnect plug connection (1).
Remove drive/electronics box for adaptive headlight (3) with
mounting (4) and cover (2).
Installation of drive/electronics box for adaptive headlight is
described separately from removal.
Installation:
Assemble repair kit as follows:
1.
Feed drive/electronics box for adaptive headlight (1) in
direction of arrow into mounting (2)
•
Drive/electronics box for adaptive headlight (1) must
be seated in guides of mounting (2)
2.
Attach mounting (2) with drive/electronics box for adaptive
headlight (1) to cover (4).
•
Drive/electronics box for adaptive headlight (1) must
be seated in guide of cover (4)
3.
Tighten screw (3). Tightening torque 63 12 11AZ
.
4.
Insert seal (5) in cover (4)
•
Make sure seal (5) is correctly located in cover (4).
RA Replacing drive/electronics box for left adaptive headlight (after 09/2006)
BMW AG - TIS
06.02.2013 09:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -