X Series E83 X3 2.0d (N47) OFFRD
64 11 077
Removing and installing/replacing Bowden
cable for temperable ventilation
Necessary preliminary tasks:
•
Remove centre fresh air grille
•
Remove right glovebox with housing
Disconnect Bowden cable (1).
Disconnect Bowden cable from mountings (1) and feed out.
Installation:
Make sure Bowden cable can move freely.
If necessary, perform function test prior to assembly.
RA Removing and installing/replacing Bowden cable for temperable ventilation
BMW AG - TIS
06.02.2013 10:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -