X Series E83 X3 2.0d (N47) OFFRD
64 53 550
Removing and installing or replacing
condenser for A/C system
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:Replace
desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove radiator
Release screws (1) and remove refrigerant lines.
Installation:
Tightening torque 64 53 6AZ
.
Replace all sealing rings and moisten with refrigerant oil.
Release screw (2) and remove spacers (3).
Release retaining clip (4) and remove condenser (5).
RA Removing and installing or replacing condenser for A/C system
BMW AG - TIS
06.02.2013 10:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -