bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Radio Remote Control Receiver > < 2 RA Removing And Installing Or Replacing Antenna Amplifier
Page 1
background image

65 20 350

Removing and installing/replacing
suppression filter

Necessary preliminary tasks:

Remove rear grab handles

Remove trim for rear left and right roof pillar (C-pillar)

Remove trim for rear left and right roof pillar (D-pillar)

Remove left and right interior lights

Detach mucket in area of roofliner

Important!

Do not under any circumstance kink roofliner (1).

Unclip roofliner (1) at retaining point (2) towards bottom and
lower.

Unlock plug connections (3) and disconnect.

Release screw (4) and remove suppression filter (5).

RA  Removing and installing/replacing suppression filter

BMW AG - TIS

08.02.2013  19:08

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Radio Remote Control Receiver > < 2 RA Removing And Installing Or Replacing Antenna Amplifier