X Series E83 X3 3.0d (M57T2) OFFRD
Version with Dynamic Drive:
Release nuts (1) and (2).
Remove retaining fixture (3).
Installation:
Make sure retaining fixture (3) is correctly seated.
All:
Disconnect plug connection (1).
Release screws (2).
Detach refrigerant lines (3) in direction of arrow.
Installation:
Tightening torque 64 52 1AZ .
Replace all sealing rings and moisten with refrigerant oil.
All:
Note:
Secure A/C compressor (2) against falling out.
Release screws (1).
Feed out A/C compressor (2) in direction of arrow.
After installation:
•
Evacuate and fill A/C system
RA Replacing A/C system compressor (M54, M57)
BMW AG - TIS
13.02.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
