X Series E83 X3 3.0d (M57TU) OFFRD
Fit special tool 11 6 470 to crankshaft.
Lubricate special tool 11 6 470 .
Important!
Do not under any circumstances touch sealing lip of new seal
with your fingers.
Slide new radial seal over special tool 11 6 470 until seal rests
against timing case cover.
Remove special tool 11 6 470 .
Screw special tool 11 6 490 into crankshaft and tighten down.
Fit special tool 11 5 110 to crankshaft.
With special tool 11 5 110 and central nut of special tool
11 6 490 , insert radial seal until it is flush with timing case cover.
Assemble engine.
Check engine for leaks.
RA Replacing radial seal in timing case cover at bottom (M57TU)
BMW AG - TIS
14.02.2013 21:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -