X Series E83 X3 3.0d (M57TU) OFFRD
11 21 531
Replacing all main crankshaft bearing shells
(M57TU)
Special tools required:
•
00 2 590
•
00 9 120
•
11 2 110
Necessary preliminary tasks:
•
Remove engine.
•
Remove cylinder head.
•
Remove front timing case.
•
Rermove rear radial seal.
•
Remove oil pump.
Important!
Replace main bearing screws.
Do not wash off bolt coating.
There must be no oil in the blind holes (risk of cracking).
Important!
Check grinding size of crankshaft.
RA Replacing all main crankshaft bearing shells (M57TU)
BMW AG - TIS
14.02.2013 21:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
