X Series E83 X3 3.0d (M57TU) OFFRD
11 71 100
Removing and installing or replacing EGR
cooler (M57TU)
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Necessary preliminary tasks:
•
Remove acoustic cover.
•
Remove fan cowl
•
Drain coolant from radiator.
(Automatic only):
Unlock and detach coolant hose (2).
Release pipe clamp (3) and (4).
Installation:
Tightening torque 11 71 1AZ
.
Important!
EGR pipe must not be fitted distorted!
Joint all components loose first.
Secure V-band clamp (3) between EGR cooler and EGR pipe.
Then secure the adjoining components to prescribed
tightening torque.
Remove EGR cooler (1).
If necessary, remove thermostat for EGR cooler (arrow).
RA Removing and installing or replacing EGR cooler (M57TU)
BMW AG - TIS
14.02.2013 21:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -